  |
|
|
DiLapse™ Digital Recorder |
|
The DiLapse unit works alongside the RSTV ReCam Transmitter and offers features not found in any other video transmission system. The Dilapse digital recording unit is capable of storing up to 3 weeks of recordings. The images can be browsed and downloaded remotely. The DiLapse unit records compressed video images from up to 8 cameras, connected to a ReCam Transmitter unit, either locally or at a remote site. Playback is performed on a PC with the RSTV DiCam Software. It may be connected locally or via phone lines from the remote site. The digital images are presented as high-definition still pictures or as sequences. The RSTV DiCam software also provides advanced image enhancement, print and fax capabilities. |
|
|
DiLapse Specifications |
|
| Hard Disk | 8.6 GB hard disk UPTO 3 weeks Storage (dependant on settings) |
| Interface Ports | RS422 for storage, set-up and playback via ReCam RS232 for maintenance and playback directly from DiCam PC |
| Video Storage | Customised recording from up to 8 cameras via ReCam units |
| Digital Image Resolution | 16.7 million colors Full 640 x 480 pixels Quad 320 x 240 pixels Hex 160 x 120 pixels |
| Time Lapse | Full:1 - 6 frames/second Quad:2 - 15 frames/second Hex: 6 - 25 frames/second |
| Operating Power | +5V/5A, +12V/1.5A, -12V/0.5A Main power 110-230V, 900 - 560 mA |
| Dimensions | 27 x 18 x 10cm. Weight 3.7 Kg |
|
|
VidiLapse™
Digital Transmitter/Recorder |
|
Combining the features of the ReCam and DiLapse unit, the VidiLapse unit is a powerful all-in-one tool for remote surveillance and recording. The built-in transmitter unit sends images from CCTV cameras over phone lines to a PC running the RSTV DiCam Surveillance Software. It also offers P/T/Z, motion detection and relay control from the software. Local connections are also available using twisted pair cable. The VidiLapse's digital recording unit is capable of storing up to 3 weeks of recordings. The images can be browsed and downloaded remotely, or archived on a 1.5 GB removable cartridge. The VidiLapse unit records compressed video images from up to 8 cameras. The event driven storage is activated by motion within the camera view and by external alarm sensors. Playback is performed on a PC with the RSTV DiCam Software. It may be connected locally or via phone lines from the remote site. The digital images are presented as high-definition still pictures or as sequences. The RSTV DiCam software also provides advanced image enhancement, print and fax capabilities. |
|
|
VidiLapse Specifications |
|
|
Video Inputs |
1, 4 or 8 NTSC/CCIR and PAL/EIA, 1 Vp-p, 75 ohms or HIZ |
|
Audio Input and Output |
Line/mic
level in (0-0.7 V RMS) Line level out (0-0.7 V RMS) |
|
Video Monitor Output |
1 software switched / random |
|
Alarm Inputs & Outputs |
8+1
alarm inputs (NC, NO or any change) (12-48 V) 2 relay outputs (<48 V AC/DC) |
|
Optional Removable Cartridge |
Record or manual dump |
|
Data Communication |
High speed RS-232 or RS-422 |
|
Control Bus |
RS-422 / RS-485 for P/T/Z control |
|
Hard Disk Storage |
8.6 GB hard disk. Upto 3 weeks. non-stop storage |
|
Optional Removable Cartridge |
1.5 Gbyte cartridge Adjustable frame storage rate; Simultaneous backup to cartridge Disk dump to cartridge of captured alarm situations Intelligent storage index for fast searching and instant image access Stored images accessible from remote DiCam PC |
|
Interface Ports |
RS422 for storage, set-up and playback via ReCam RS232 for maintenance and playback directly from DiCam PC |
|
Video Storage |
Customised recording from up to 8 cameras via ReCam units |
|
Digital Image Resolution |
16.8 million colors Full 640 x 480 pixels Quad 320 x 240 pixels Hex 160 x 120 pixels |
|
Time Lapse |
Full:1 - 6 frames/second Quad:2 - 15 frames/second Hex: 6 - 25 frames/second |
|
Operating Power |
+5 V/7.2A,+12V/1.5A |
|
Dimensions |
27 x 18 x 14cm. Weight 5.8 Kg |
